by MAYA GUPTA

Any customer before buying web hosting would definitely verify the details about the company, so let your potential customers feel safe on your website with SSL certificates. Why would a website with IT services need SSL?

Websites providing IT services should offer a secure interface to transfer the information if they are collecting sensitive information from their visitors, such as personal information or credit card details. Especially SSL plays a very important role in the websites with Member Areas or Control panels of the Domain and hosting customers, as they ask for the sensitive information like passwords and their personal details. For instance any website designing company, asking customers to fill in the form and give their personal data and requirements of the project, customer will check for SSL before sharing his sensitive information like e-mail ids, phone no. etc. to be protected from hackers and Spam.

• An SSL certificate proves the legitimacy of your business with complete verification of your company credentials. • SSL makes sure the security of credit card information of your customers. • Make your Web site a safe place for your visitors and customers. • Increase customer confidence on your website. • Secured Socket Layer Boost your Website’s credibility and get you more customers for your services like hosting, web designing etc. • SSL Certificates on your website shows your concern towards your customers’ safety, which builds a positive image and goodwill.

Consequences of not deploying an SSL Certificate on IT Service providers-

Before a customer logs into his control panel and before providing his personal details and passwords, users check the security information of the Website, which can be proved through ? The padlock symbol at the bottom line of your browser ? URL address shown at the top will begin with an https:// ? Checking the File and then Properties of your website that will confirm that your browser and the website share the same security attributes. Protecting your valuable customers’ credit card and personal information is the most essential for any company be it be web designing, domain registration, hosting or an IT company, If you will not value your customer’s security it may result into - • You will loose a potential customer. • If the visitors will not find the trust indicators (SSL Certificates), they may loose the whole confidence in your brand, products and services, and this may degrade your goodwill. • It may decrease your visitor conversion rates and may effect your over all profitability • You Competitors with SSL on their Website may capture the market.

So all the websites should secure their visitors and customers online access, passwords, communications, Valuable and highly sensitive information (Credit card details) and maintain their Privacy standards with a high assurance web server certificate.

  

by SHARE WONDER

Why do you need to record the computer?
“What’s wrong with my computer/this tool?” When you have problems of trying new applications or system, and have no idea of how to describe what happened on your computer, you may need a tool to mirror your operations, and then send it to a computer guru or technical support for help. It need to show exactly what you have done and how can this happen, so the technical staff can understand you clearly and give you the quick solution within minutes. It’s efficient for you to get the quick response.

Do you really need a camera to record your computer screen? A camera face to your computer is not the best way for these purposes. First, the camera can not record the screen exactly. Second, you can not edit the video by adding some instructions or narrations. Third, the video file is too big for web sharing and transmission.

Maybe you need an application to record your screen, not a camera! Screen recorder tool helps you to record the screen to mirror all of your operations without camera. You can add tips to highlight the important functions. Furthermore, you can add narration from microphone easily to enhance the demo. At last you can publish the flash movie and transmit to the technical guys. As you know, the flash format with smaller size and better for network transmission.

It’s very popular that these demo creator tools work with three steps, record screen, enhance with annotations and publish to movie. A good one in this area I want to highlight is Wondershare DemoCreator, with the excellent functions of Auto-annotation and click zone. It’s suitable for individual uses, no need of programming or media skills.

Especially, DemoCreator’s build-in ready-for-use after capture, adds the annotation and click zone to recorded screens automatically when recording is being done. After recording is completed, you can just publish the movie immediately. The actions of mouse movements and application operations are recorded automatically already. Audiences can know how to use your products step by step when playing the demo. Furthermore, you can add some animations or interactivities to enhance the software demo, thus making the demo more animated and interactive.

Learn more from: http://www.sameshow.com/demo-creator.html

View samples from: http://www.sameshow.com/democreator/create-software-demo-samples.html

  

by ANDREW WATSON

Data Recovery has become the buzzword of today. If you are looking for data recovery software on Google you will come to know about thousands of company. These data recovery company gives options to try the software before purchase. You can download the demo version which shows the preview of the recovered data. This helps you to choose the best data recovery tool to salvage your data.

First step of data protection is back up. Data back up can be done on CD-ROM, DVD and an USB. It is best to have back up on the external hard drive. Data back up can be done on weekly basis; if it is done on daily basis then it’s the best measure of data protection.

There are some important tips for data protection

• To minimize the probability of accidental format it is advisable to have the back up of system files and make an emergency boot floppy for each system.
• Do regular defragmentation to ease the data recovery task
• Best way to prevent the data from virus is to use good antivirus and update on regular basis
• You can also keep the information of CMOS of your hard drive this will help you to inter the data into your new system to get the drive work

If you have experienced a data loss then are certain things you should avoid these things

• If you have accidentally erased the content of the hard drive then don’t write anything on the hard drive.
• If you have erased any partition then do not create any other partition.
• If you have emptied your recycle bin and afterward you realized that it was important then do not store any thing on the hard drive before recovering your data.

Data loss can occur in any number of ways as described above or either due to software malfunction, viruses, or even sabotage. To over from such losses data recovery software provides help to recover from such logical crash. Actually when data lost occur from the hard drive then only the entries of the data get erased but data still resides in the data area of the hard drive. These data recovery software helps to regain the entries on File Allocation Table.

  

by JOANNA GADEL

A fantastic pace has been noticed in the web sector. As a result, various definite standards and techniques are emerging. Every time there is an improvement, the web site design and applications grow complex, and there is a subsequent impact in the common web programming too. Several web programmers (Like: http://www.webprogrammers.com.au/) face this problem while making a website. Web programming requires expertise on many different levels. Skills in user interface design, human machine interaction, information design, scripting, code library development, database design and database queries are some of the important facets that are supposed to be had in a smart database programmer. In many or all of these levels a web programmer can face problems, and any web pattern needs to have explained the design considerations across any or all of these levels.

As such we need to be able to find a programmer who is aware of the problems area and can implement the required solutions. The programmer jobs include the solution of the problems originated in the day to day web programming. But first we must know the places where the problems usually occur.

The Problems Area

Form processing:

Form processing is the first step to record the problem of getting and verifying input from a user. It is the main part of all web applications, though there are many different approaches for solving this problem available to the web developer.

The basic method remains the same other than the actual content being entered. All forms should:

• Show an empty form to the user • Confirm the data entered to be valid and depict an error if it is incorrect • Perform the required action by the use of the data

Using either a single or multiple page design forms can be implemented. A self-referring script is needed for the single page technique, while the user can enter, confirm and submit the data through multi-page forms.

Navigational Structure:

A consistent look and feel is established by a clean, structured navigation and information design. Users can easily find their location in the sites through a proper navigation system.

There are at most three kinds of navigational structures:

• Single level navigation carries a list of top level areas. • The user can then drill down through the different hierarchical parts that the multi-level navigation has created, and they can find their desired content. Generally the hierarchy is two level deep to keep the display simple.

• Third navigational structure is the dynamic multi-level navigation that uses a hierarchy. Here the user after selecting the parent can be able to see the next level of navigation.

Database Operations

Accessing database is a fundamental problem for web developers. It is a common problem for the While entering the data into the database and editing entries through specific functions or an abstracted database wrapper, most of the times the data is found to be erroneous; this makes it a good candidate for pattern. Nearly all the programmers including php programmer (http://www.getaprogrammer.com.au/), java programmer, sql programmer and asp .net programmer make this phase as an essential part for a smooth running of any database design. They make a user interface design to clear the process.

At a higher-level many objects or items, the data used is captured by a row in the database. Here exists a common problem for the web programmers creating a set of useful functions and information based on these items.

Authentication Problems

The authentication phase needs to be revised properly with the different levels of a cheap programming. Several familiar mistakes have been there in these levels, and we are to solve them without any delay.

• The web programmers do nothing as to record or track any request to authentication in the None Level. • In the Session Level the web programmers used to track this anonymous person by the current visit only. • Another problem is there while tracking the anonymous person across numerous sessions in the web site in the Visitor Mode. • We must authenticate the person when we finally have the User with the relevant information.

These levels should be thoroughly checked up and similar other implementations should be necessitated if need be. The above levels should be considered together while in case of authentication.

Error Handling

It is a great challenge to build graceful degradation into a website. It is a vital job to hire programmers who can catch the errors before they confuse the users. By logging and notifying the errors a professional coder can prevent these errors to happen again.

Keeping the site alive even if components are off-line, the database programmers can handle any error problem by serving the database requests in the backed-up database that is read-only also.

E-commerce Problem

Using form and authentication any problem in the E-commerce can be easily solved if it is detected earlier. Only, a particular pattern independent on a particular implementation of forms or authentication is to be built. But first an interaction is to be done with the user and backend processing of the data.

  

by PETER VAN HOVE

Because of the different standards for rewritable optical media, in particular CD-RW, DVD-RW and DVD+RW, the state of the media after a quick erase is different. This state determines if it’s still possible or not to recover data with any data recovery software tool for that matter. There is some complexity involved and you may need to read this article twice Mainly because of the different exceptions and the role of the software vs. hardware.

First maybe the difference between a full erase and a quick erase on drive level:

I’m intentionally mentioning drive level because in most cases it’s the drive that executes a blank command sent by the software. So for the software it’s more or less a “hit and run” command. Send it down and walk away or poll the drive till ready.

When a full erase command is issued on re-writable optical media then the complete surface of the disc is over-written with a neutral pattern (all zeroes or all 0xAA or something like that). The result is that all data that was once present is now gone forever. There are no magical tricks to ever find the data back, the old content has been wiped completely, not even in a high end laboratory with geniuses at work would it be possible to recover the data. Additionally, the disc’s structures on the inside rings, which all drives use to determine the layout of the media , have been updated to resemble empty media. All references to tracks and session that were once there are now gone.

A quick erase is meant to be quick (duh …) and therefore the disc’s main data area is left unaffected, or at least mainly unaffected. All (or most) data remains present on the disc. What changes is the disc’s structures again, on the inside rings of the media. All references to tracks and session are deleted and the media is left in a state which seems like empty media for a CD/DVD writer (in most cases … read further).

So if the bulk of the data is still there after a quick erase … what’s the problem then you ask ? Well, the biggest problem exists for CD-RW and DVD-RW (DVD dash / minus RW).

As I explained before, during a quick erase on drive level the disc’s structures are changed so that a drive sees the disc as blank media again afterwards. And that is the big problem, an empty disc - as far as the drive is concerned - is an empty disc and the drive will not allow to read anywhere on the disc. All read commands fail immediately with drive generated errors. The drive doesn’t even try reading on the requested locations. At this point the drive is the limiting factor, there is no way to circumvent this as it’s not possible to tell the drive there is different media inside than what the drive sees for itself (*).

The only way (*) around this problem is to send the disc to a (possibly expensive) recovery lab that may have the right equipment to deal with it. As this is a by hardware limited problem, some labs have custom made hardware to deal with this specific problem.

(*) If I notice there is more interest in this then I will dedicate another article to this problem, in particular how a handy person with too much free time could try a few things.

There is one big exception for DVD-RW (not CD-RW) if the erase software works in the spirit of the DVD+RW standard. Meaning that the software doesn’t issue a “quick erase” command but instead does the erasing by itself, like it would on DVD+RW. Read further to understand.

The big exception to all the above is DVD+RW (DVD plus RW). The designers of the format were clever enough to decide that there shouldn’t be an erase function for this format at all. After all a full erase only adds to the so called DOW (Disc Over-Write) and thus reduces the quality of the media. If a full erase is truly required by the user then the application software can still simply write a neutral pattern over the complete surface of the disc with the same effect. And as a DVD+RW can have only one track in one session, changing the inner circle structures is not needed either. If there is a track already … well then there is a track already .. why change that ? If one wants to write new content then the old data can simply be overwritten. Of course this also positively influences background format and other features I won’t go in to now. In other words there is no erase command that an application can send.

If a user wants to quick erase a DVD+RW then the application software must be clever enough to simply write some neutral data over file-system structures (e.g. ISO9660 and UDF etc). And in fact that’s what most applications do when they quick erase a DVD+RW.

The consequence is that for a DVD drive there still is a track after a quick erase, so this is not blank media, and if there is a track with a length then, data recovery software can send read commands and get data back. And a scan for missing data can yield to positive results.

Same as with DVD-RW there is a big exception. The reason is that in the beginning not all drive manufacturers understood the philosophy and spirit of the well thought out “no erase command” principle. So what they did was make sure that a format command basically does what an erase command did and then they informed all software vendors, which were obviously confused, that they should send a format command instead of a blank command. Wrong …

To the best of my knowledge most drive vendors today have adopted the “no erase” +RW philosophy properly and recently developed drives don’t erase anymore, even not when a format command is sent. The same goes for the software vendors, they too saw the light. However … it’s hard to change the world and exceptions still exist out there.

So when people ask, “I have a quick erased DVD+RW or DVD-RW … can it still be recovered”, it’s difficult to give a definitive answer because it depends so much on the type and make and even firmware revision of the writer, in combination with the erase software and version of that software.

From experience, quick erased DVD+RW media, erased with a current drive and current software is very often recoverable. Chances for success degrade significantly for DVD-RW, because many applications simply send an erase command (or format command) to the drive. Quick erased CD-RW is only recoverable in the lab or with special tricks that are hard to explain here.

Hope this made sense to you …

Terminology: “Erase” and “Blank” are basically the same, software mostly uses the term “Erase” whereas official specifications and standards use the term “Blank”, as in Full Blank or Quick Blank.

Interesting links from wikipedia explaining the different formats: http://en.wikipedia.org/wiki/Compact_disk_erasable http://en.wikipedia.org/wiki/DVD-RW http://en.wikipedia.org/wiki/DVD_plus_RW http://en.wikipedia.org/wiki/DVD-RAM

Copyright © 2007, www.isobuster.com all rights reserved. This article was written by Peter Van Hove, CEO at Smart Projects. Smart Projects is an experienced company with high focus on CD and DVD technology, highly involved in CD / DVD / BD and HD DVD Data recovery with IsoBuster as one of its leading applications.

  

by KIONG LOO

For the past few years since the explosion of broadband connection,the spreading of spyware and adware has been spreading at an alarming speed.Most of us are always be told to install this install that will help in adware removal.(blah blah blah) If you are unsure of what you are installing,you may in turn be installing an adware into your computer instead of an anti adware software.

Question: What is a Adware? Answer: Adware is software that is installed on your computer to show you advertisements. Symptom: Sudden/overnight slowness of your PC.This is cause by the adware running in the background retrieveing advertisment from internet.It will consume your CPU,Memory and Internet Bandwidth without your knowledge.This is very annoying and you will perodically get pop up now and then with advertisment.Some time it is so severe that you need to close the adware advertisment before you can continue to use your PC.

Question:What is a Spyware? Answer: Spyware is software which is installed on your computer to spy on your activities.This is very dangerous if you are doing online transaction especially internet banking. Symtpom:very similar to adware but this will have software to steal your password(very dangerous)

Remember Prevention is better than CURE!

In this broadband age,getting infected with spyware and adware has never been easier.A simpler click and you got it.You will need a protection before it is too late.You cant wait till your credit cards has been stolen then you decide to install a anti adware/spyware remval software.

For IT Savvy user, i dont see this as much of a problem as they are more aware of what to click and what not to click BUT for most user on the internet this is not the case.

We need protection from Adware and Spyware. The question has always been WHICH ONE TO USE?

I would recommend you ADWARE ALERT.

Now you will be asking why i should use this.

Let me tell you the benefits of this excellent software below

* you can try it out for free before buying (this is very important) * Designed for Windows 98/ME/XP/2000 & VISTA (Not many anti spyware/adware removal fully supports Windows Vista) * Very easy to use interface .Try it to see it yourself * Registered user get 24/7 technical support.You can get live chat support anytime anywhere.

What more do you want?Try it out yourself here for free.

  

by DANIEL JEREMIAH

“Free submission to 70,000 search engines!” Come off it. If you can name 10, you’re really good. Who on earth uses the other 69,990 engines? And the cost for this submission? Hundreds or more of unwanted, irrelevant emails.

Or what about, “Boom, hoot, trumpet your site to 10,200,000 WebPages ” Cool! Instant free traffic by the millions. A marketer’s dream.

Google ‘ad directory submission’ or ’submit to free ad directories and you’ll see anything from 25,800,000 to 97,000,000 results. Lots of choices; must be a good strategy, right?

Wrong, unless…

Lets say you decide to sign up for a FFA (free-for-all) service that blasts your site for free to 10 million pages at the click of your mouse. Wow! Fantabulous! Hordes of traffic.

Hold on there; what really happens is this.

You’re creating millions of links pointing to your website instantly. While this supposedly improves your ranking in the search engines, it doesn’t always work out that way. Sure, to achieve a good ranking, you must have others linked to your webpage, but certainly not in the millions in one sweep.

The real problem.

But that’s not the real problem. There’s a much bigger one with free site submission services. You are essentially submitting 10 million free ads. The email address you provide [and it will be confirmed] to subscribe to this service will get resold maybe a few million times. Can you imagine the avalanche of reverse-marketing emails you will be receiving? The load will crush the most enthusiastic marketer.

“Ah,” you say, “I’ll just get a mail checker program and delete them all without reading; or better yet, sign up for a free web mail service, then subsequently cancel the account.” No can do. You see, you’ll be receiving verification requests, and unless you respond, almost all of your submissions will fail.

So what’s the solution? If you do decide to go with a site submission service you need to first set up a ‘capture and respond’ mode, using an automated email system. Search for submission services that provide this feature. Basically, what it does is handle the required responses and keeps the dreaded spam mail away from your inbox. This service is not free, but well worth the price.

Here’s a link if you want to review available services… http://www.ad2go.com/

Remember, the sustained success of your website depends on two major factors:

* The number of quality links to and from your website. There should be ‘quality’ links, not just quantity, and your site should include reciprocal linking, not just one-way links.

* The quality of the information on your website. This is because you will start to receive one way incoming links from other websites, not just free directories.

Better Strategies.

While we’re on this page, let’s briefly review more website marketing strategies.

1. If you want to maximize the benefits of marketing your website through a linking strategy, it’s best to include other types of linking besides just directory submissions. Try social bookmarking and article writing as well.

2. Online Classifieds. This is an effective advertising strategy but you’ll need to know how to write persuasive advertisements and also how to do a keyword check for your ad header popularity.

3. Traffic or Link Exchanges. A couple are featured in http://www.vmsbonline. com/IntMarketing.html

4. “Safelists!” Use with caution, if you must. Your “permission” to send your promotional email also requires your “agreement” to receive other people’s unwanted mail.

5. Graphical banner exchanges may work better than link exchanges. But banners work best when relevant to your page content, not as irrelevant billboards.

6. Participate in forums…really participate actively. Offer useful advice, opinions or information. Include your site URL in your signature at the end of each post.

7. Press releases, directory submissions, viral marketing, and joint ventures are viable methods that can bring measurable results.

Before selecting your promotion strategies, take time to understand exactly what is involved, and decide if it focuses on what you’re aiming at.

Also, avoid getting involved in too many marketing campaigns too soon or you will end up confused and disorientated. Become familiar and comfortable with one method before experimenting with others.

“Copywrite: Dan Jeremiah - http://www.vmsbonline.com - a completely integrated site for practical business opportunities”

  

by FRANZ ROBINSON

As the growth and development of technology, new tools to help the people to perform a certain task is presented, in such case, the progress of Daily Time Software processes the payroll reports efficiently and effective, tracks down the employee’s attendance, and reasonably implement companies’ policy. Traditional timekeeping methods with the usage of manual time card set incorrect data entry and calculation, and, also the faulty application of company policies. With the Daily Time software, that is vital for all businesses, holds the course of action made by the employees. Daily Time Software is designed to operate in any type of business structure - from a small agency to large business organizations. Daily Time Software is a computer based time clocks and time keeping solutions that provide regular trace of employees’ sign-in/sign-out times by means of computer system.

Having a better understanding of business costs and the labor from simple job tracking situations to extremely complex requirements, Daily Time Software provides an affordable way to optimize your human resources. With Daily Time Software, task database is programmed to create and to assign multiple tasks to a job quickly, eliminating the need for repetitive data entry.

Through Daily Time Software using a computer structure for the login procedure, employees just need to enter their passwords to login.

By the programmed database, it will provide job details to the human resources department as the salary period comes. With this programmed database, the accumulation of employee information will be possible and at the same time helps managers to employ simple approach to inspect the employee information for verification of truth. This programmed database will allow the supervisor to establish timetable for each employee including recess times, holidays and whether overtime is needed.

Daily Time Software is used by many organizations to assist hold course of employee hours for payroll purposes. Daily Time Software tracks employee time information in a database that helps managers to have simple entry to employee data and to analyze the data for accuracy. The Daily Time Clock packages provide scheduled administration.

Daily Time Software innovative structure features fundamental coverage and connections to payroll systems. At the conclusion of the salary time, each employee’s hours are automatically reported to the human resources department, reducing paperwork and eliminating errors. Arrival and exit times using a computer time clock. To log in/log away, employees take unusual identifiers, such as cards with magnetic stripe or barcodes, biometric input devices that stop fingerprints or handprints, and iris scanners that are not widely distributed because of privacy concerns.

Read more about Daily Time Software